Decisions, decisions, decsions . . .

For me, inspiration often strikes at the most inconvenient moment- right at the time that there is absolutely nothing I can do about the idea I have.  I have lost a lot of good ideas to convenience, and so I have learned that when it strikes, I’d better act, or I might loose it.  Such is the case with this project.  It is totally inconvenient.  It has no purpose, other than to accomplish an idea that ran across my brain.  I had to interrupt other things to work on it.  It is taking more time than I wanted.  And yet, here it is.  Needing to be cared for and nurtured until it grows up.

So, remember my last post on inspiration?  Here’s where we left off-

Decisions 1My pics are not so good- I really need a camera other than the one on my phone, and maybe some lighting in my studio, but this is what I’ve got for now, and it will have to do!  Anyway, I had found the perfect fabric, tool and book  to get my ideas flowing, and while I had started playing a bit, I just hadn’t found the right combo.

Decisions 2Yes, but no.

Decisions 3Nice, but way too dark.  Overshadowed the print fabric terribly.

Decisions 4Now we’ve got something.  These wedges were on the design wall for a couple of weeks before they decided what they wanted to be, so I was pretty happy at this moment!

Decisions 5I have major issues with staying on task, although I really do finish most projects that I begin.  I just need a break sometimes from a big project for something smaller and a little easier, hence the baby quilt on the right.  I had finished cutting and placing all of my wedges as desired on the design wall, and I needed to “look away” for a minute, so I put together this baby quilt.  I will do a different post on it.

Decisions 6I finally started sewing wedges together, section by section, row by row.  Then I realized that I hadn’t thought through my design completely.  What about those odd shaped sides?  Should I leave them?  No, I want a bigger quilt than this and want to add borders, so the sides have to be squared up.  Back to the book Sizzlin’ Sixties.

Decisions 8I’ve mentioned before that I don’t follow directions well, and here is a good example of that.  It really does make a difference to actually read rather than just looking at the pictures.  Just saying.  Anyway, in order to make half wedges to create the straight sides needed on a hexagon quilt, you cannot just cut a wedge, and then cut it in half.  It doesn’t give you enough seam allowance.  (See above).

There are different ways to cut these side pieces.  The book uses a traditional 60 degree ruler, which I did not have, so I could not do it the way it was written.  Also, Julie from Jaybird Quilts has a Sidekick ruler that would do the job fabulously, but alas, I don’t have it yet.  So, I had to improvise.  It is possible to do this without an additional ruler, but I would have rather had the Sidekick.  I hope to get it soon.

So, here’s what I did-

Decisions 9I used my Hex N More ruler and lined up my straight edge with the far top point of the ruler, and the 4 1/2″ line, as this was the size I needed to make my straight edges.  Then I cut.

Decisions 10To continue cutting the “half” wedges I needed without waste, I turned to my straight-edge ruler and lined up the 60 degree line with the cut I made before.  This worked fine, but like I said, I would have rather had the Sidekick.

Decision 7As you can see above, those “half” wedges create a straight edge for the hexagon shaped quilt.  It isn’t required if you want the sides of the quilt to have the hexi shape, but again, I want to add a border and need the sides to be straight.

Decisions 11All sewn together!  Looking fabulous so far, if I do say so myself!

Decisions 12So, here’s the thing- remember that when cutting these wedges, you end up with a positive and negative wedge- see below-

Decisions 13The quilt I am making so far uses only half of the wedges that I have cut so far.

Decisions 14So, the story isn’t over!  What will these become when they grow up?  I’ll let you know when I know…